Want this question answered?
Be notified when an answer is posted
That depends on exactly what use that particular concrete mix is for.
A lean mix simply means that there is more liquid that concrete in the mix. The mix is thin and pours easier. It is sometimes used when you need to make a base on an uneven surface, like dirt. You would pour the lean mix, and then use it to put the more solid mix on top of.
it is typically 5 parts lime, 3 parts sand, 1 part cement, but varies depending on use and situation
A basic mixture for general use (paths, etc) is: 1 cement : 2 sand : 3 gravel by volume. Mix ingredients dry and add water until the concrete is workable. If too sloppy it may be weak, if too dry it may be difficult to work with.A basic mortar mix (brick laying, etc) is: 1 water : 2 cement : 3 sand.
If you are positive that it is asphalt I would not suggest adhering tile directly to the asphalt. If removal of asphalt is not an option I would install a subfloor and use thinset mortar to adhere the tile. Another option (probably the better option) would be to pour a concrete mix over the asphalt. Than use thinset to install the tile. The concrete will incapsolate the asphalt. Asphalt more than likely has oils in it and can be a hazard.
go to lowes and buy concrete mix and get alot of water.
Use for non-load application. Mix with sand to produce a mortar for bricks and blocks. Mix proportions by weight for TYPE N Mortar - 10 kg Masonry Cement - 35 kg Sand
Thin set mortar? It is what you use to lay ceramic tile.
That depends on exactly what use that particular concrete mix is for.
A lean mix simply means that there is more liquid that concrete in the mix. The mix is thin and pours easier. It is sometimes used when you need to make a base on an uneven surface, like dirt. You would pour the lean mix, and then use it to put the more solid mix on top of.
in asphalt and cement concrete. We can use sand ,cement and water as a mixture of mortar.