you cut the highlighter in half and take out the felt tip and you put it in a small amount of water. After you put the felt tip in a small ,amount of water you put it under a black light and the water should glow. The best color to use is a yellow highlighter.
It is a fuse or a breaker. The wire inside the fuse will burn out and will need to be replaced once the fault has be corrected. A breaker is designed to click open, so breaking the circuit.
break it.
In switch language, open means to disconnect, or break the circuit. Some people call this "turned off". Closed, is to connect, or make the circuit. Some people call this turned on. In the case of a normally open switch, the switch is open (off) unless something takes action on the switch. Pushes a button for example, or holds a magnet near the switch, or other active force. A normally closed switch is closed (on) unless some force causes the switch to be opened.
Don't break the brake handle!
open it
it is Phosphor
the first highlighter was used in Ireland
It depends on the highlighter and how you are putting the highlighter felt in the tonic water.
AnswerSimple, you grab a bowl fill it half way with water crack open a highlighter (prefer yellow) squeeze the ink out of the highlighter into the bowl of water and turn on your black light and you have glow in the dark water.(:
A highlighter is "un surligneur" (masc.) in French.